www.ICELED.co.uk
ZAP+
+
+
+ GUIDE v1
3
Operation
All operations are performed using a simple two-button interface. There are five
distinct modes to select from:
•
Standby/Bypass
Effectively turns off light-sources by blacking them out or
passes through external ICELED data if present
•
Static colour
Provides fine-tuning of any particular hue or shade
•
Phasing colour
Automatically creates smooth sweeps through one of four
different colour ranges
•
Beat to colour
Sequences random colours in time with an audio beat, with
adjustable fade-out
•
Strobe
Produces maximum intensity flashes in time with an audio beat or from
an adjustable time-base
Changing mode
Briefly press either of the two buttons to shift to the next mode in turn, as indicated
by the LEDs. The Red button shifts away from Standby, through each mode
eventually reaching the Strobe mode:
The blue button shifts back through the modes eventually reaching Standby again:
Standby/Bypass
When switching to Standby the controller will automatically fade-out slowly for a
more dramatic effect. However, one more press of the blue button will always force
the light-source to switch-off
instantly
if required.
Note that the most recent operating mode is automatically resumed on power-up
even if though the power has been removed.
Strobe
Beat to colour
Phasing colour Static colour Standby
Standby
Static colour
Phasing colour
Beat to colour
Strobe