28
Preference Settings
4.7
Options for standby mode
You can have the current time displayed on the front display
in standby mode. Select the
Settings
>
Miscellaneous
menu
and set the
Standby Mode
option to
Active
; otherwise, set it
to
Passive
. When you set the
Standby Mode
option to
Active
,
the receiver can also bypass the signal from the antenna. To
save power consumption, you might as well set the
Automatic
Power Down
option to
Enable
. With this option enabled, the
receiver will be turned off automatically when there is no ma-
nipulation over three hours.
4.8
Interactive television services
You can use the interactive television services called
Multime-
dia and Hypermedia Expert Group
(MHEG) that is available by
default. If you don’t want these services, set the
Interactive
Services
option to
Off
in the
Settings
>
Miscellaneous
menu.
You should configure the net-
work setting properly, otherwise
you may be limited in your use
of the interactive television ser-
vices.
Select the
Installation
>
Network Setting
>
IP Setting
menu.
The easiest way to configure the network settings is to assign a
dynamic IP address to the digital receiver by setting the
Con-
nection Type
option to
DHCP
.
To assign a static IP address, set the
Connection Type
option
to
Static
, then the
IP Address
,
Subnet Mask
,
Gateway
,
Primary
DNS
and
Secondary DNS
options become enabled. You have
