Ice iS1100L, Руководство оператора и каталог запасных частей

Страница: 20 / 63

18 ICE iS1100L
OPERATOR
MAIN BRUSH REPLACEMENT
CAUTIO N! It is advisable to wear
protective gloves when replacing the
main brush because there can be
sharp debris between the bristles.
the pedal (2) and stop the machine.
2) Turn on the machine
3) Unscrew the knobs (34) and remove the right
cover (33).
4) Loosen the knob (A, Fig. 3).
5) Unscrew the knobs (B, Fig. 3) and remove the
brush compartment cover (C).
6) Remove the brush (A, Fig.4)
7) Check that the drive hub (A, Fig. 5) is free
from dirt or foreign materials (ropes, rags, etc.)
accidentally rolled up.
8) The new main brush must be installed with
the bristles rows (B, Fig. 5) bent as shown in the
9) Install the new main brush (C, Fig. 5) and
ensure that the mesh (D) correctly fits into the
relevant drive hub (A).
10) Install the broom compartment cover (C, Fig. 3)
and tighten the knobs (B) and (A).
11) Install the right cover (33), then tighten the
knobs (34).
12) Check and adjust the main broom height as
shown in the previous paragraph.
NOTE:Brushes with harder or softer bristles
are available. This procedure is applicable to
all types of brooms.
Figure3
Figure4
Figure5