Ice iS1100L, Руководство оператора и каталог запасных частей

Страница: 14 / 63

12 ICE iS1100L
OPERATOR
OPERATION
On some points of the machine there are some adhesive plates indicating:
- DANGER
- WARNING
- CAUTION
While reading this Manual, the operator must pay careful attention to the symbols shown on the plates.
Do not cover these plates for any reason and immediately replace them if they are damaged.
BATTERY CHECK ON A NEW MACHINE
NOTE:if the machine is equipped with electronic battery charger (optional), this
must be connected to the batteries to allow the machine to operate.
Li-ion battery already installed on the machine
Li-ion battery charger installed on the machine
Li-ion batteries already installed on the machine
1) Open the machine body(5) and check that the batteries are connected to the machine with the connector (44).
Connect machine i-synergy
TM
COM port to the batteries.
2) Close the body (5).
3) Place the ID card on the scanning area (71) to turn on the machine.
If the battery level indicator shows all the segment , the batteries are charged.
chapter).
i-synergy
TM
INTRODUCTION
i-synergy
TM
collects operational data from cleaning machines and transmit the
information to ICE’s server. The ICE server generates daily reports and send them to
designated end users by email. From these reports, end users will have information
Besides, i-synergy
TM
also collects data on lithium-ion battery, vacuum motor, brush
deck motor, transaxle, and other electrical components at least once every minute
when the machine is in use and even during battery charging.
i-synergy
TM
malfunction. ICE maintenance personnel will receive a SMS within minutes from the
ICE server for immediate servicing.