14
ICE iS1100
OPERATOR
STARTING AND STOPPING THE MACHINE
Starting the machine
1) Sit on the driver’s seat (19).
2) If necessary, adjust the seat to a comfortable position by using the lever (20).
3) Turn the ignition key (71) to “I” and do not press the pedal (2). Check that battery level indicator
on the LCD display screen shows all the segmemt(charged battery). If battery level indicator
begins flashing, turn the ignition key to “0” and charge the batteries (see the procedure in
Maintenance chapter).
4) Drive the machine to the working area, by keeping the hands on the steering wheel and pressing
the pedal (2) to move forward and press the switch (65) to move backward(buzzer on). The drive
speed can be adjusted from zero to maximum speed by increasing the pressure on the pedal (2).
Note:The seat (19) is equipped with a safety sensor, which allows
the machine to be driven by pressing the pedal (2) only when the
operator is on the driver’s seat.
5) Lower the main brush(10) with the lever (72); it will start turning.
6) Turn on the vacuum fan(51) by pressing the switch (67).
Note:The vacuum system turns on only when the main brush is lowered.
7) Lower the side brushes (8 and 9) with the lever (69).
Note:The side brushes (8 and 9) can be lowered and lifted even
when the machine is moving.
The side brushes do not turn when they are lifted or when the
main brush is lifted.
8) Start sweeping by turning the steering wheel (1) and moving the machine forward by
pressing the pedal (2).
Stopping the machine
9) To stop the machine, release the pedal (2).
In case of emergency, press the emergency push-button (15) to immediately stop the
machine. To deactivate the emergency push-button (15), turn it in the direction shown by the
arrow.
10) Lift the side brushes (8 and 9) with the lever (69).
11) Turn off the vacuum fan(51) by pressing the switch (67) .
12) Lift the main brush (10) with the lever (72).
13) To stop the machine, turn the ignition key (71) to “0”.
WA R N I N G ! B e f o r e l e a v i n g m a c h i n e o r p e r f o r m i n g a n y
maintenance,repair,cleaning or replacement procedure,stop on level
surface,turn off machine,and remove Ignition key.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
