SAFETY PRECAUTIONS
ICE i18B/i18C
4
OPERATOR MANUAL
This machine is intended for commercial use. It
is designed exclusively to scrub hard floors in an
indoor environment and is not constructed for any
other use.Only use recommended accessories.
All operators should read, understand and
exercise the following safety precautions:
1. Do not operate machine:
– Unless trained and authorized.
– Unless you have read and understood the
operator's manual.
– In flammable or explosive areas.
– If not in proper operating condition.
– In outdoor areas and standing water.
2. Before operating machine:
– Make sure all safety devices are in place
and operating properly.
3. When using machine:
– Go slow on inclines and slippery surfaces.
– follow all safety guidelines.
– Report and fix any damage to machine prior
to operating it.
– Never allow children to play on or around
the machine.
– Do not operate on inclines that exceed
2%(3°).
4. Before leaving or servicing machine:
– Stop on level surface.
– Turn off machine.
5. When servicing machine:
– Read operator's manual thoroughly prior to
operating or servicing this machine.
– Use manufacturer supplied or approved
replacement parts.
– Secure machine with wheel blocks prior to
jacking the machine up.
– Use approved jack or hoist to safety elevate
the machine.
– Disconnect batteries prior to working on
machine.
– Wear gloves when handling batteries or
battery cables.
– Avoid any contact with battery acid.
– Avoid moving parts. Do not wear loose fitting
clothing while servicing machine.
Batteries may emit hydrogen gas.
Explosion or fire can result from
hydrogen gas. Keep sparks and open
flames away! Keep battery compartment
open when charging(except maintenance-
free batteries).
Flammable materials can cause an
explosion or fire. Do not use flammable
materials in tanks.
Flammable materials or reactive
mentals can cause explosion or fire. Do
not pick them up.
FOR i18B
Содержание I18B
