background image

6

OPERATOR MANUAL

 / / -OB /

SAFETY PRECAUTIONS

Do not operate machine:

- Unless trained and authorized.
- Unless you have read and understand the
  operators manual.
- In flammable or explosive areas.
- If not in proper operating condition.
- In outdoor areas.

Before starting machine:

- Make sure all safety devices are  
  in place and operate properly.

When using machine:

- Go slow on inclines and slippery 
  surfaces.
- Follow all safety guidelines.
- Be very careful when using the machine in
  reverse.
- Reduce speed when turning.
- Report and fix any damage to machine prior 
  to operating it.
- Never allow children to play on or around.
- Do not operate on inclines that exceed 5 %
  (3 °).

Before leaving or servicing machine

- Stop on level surface.
- Turn off machine.

When servicing machine:

- Read operators manual thorough ly prior 
  to operating or servicing this machine.
- Use manufacturer supplied or approved 
  replacement parts.
- Secure machine with wheel blocks prior
  to jacking the machine up.
- Use approved jack or hoist to safely ele-
  vate the machine.
- Disconnect batteries prior to working on 
  machine.
- Avoid moving parts. 
  Do not wear loose fitting clothing while
  servicing machine.

1.

2.

3.

4.

5.

This machine is intended for commercial use. 
It is designed exclusively to scrub hard floors in an indoor environment and is not constructed for any other use. 
Only use recommended accessories.

All operators shall read, understand and exercise the following safety precautions: 

Содержание 20NBL+-OB











































Отзывы: