Ice 20NBL+-OB Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 42

Ice 20NBL+-OB Скачать руководство пользователя страница 28

28

OPERATOR MANUAL

/ / -OB /

PREVENTIVE MAINTANANCE

Daily maintanance

1.

2.

3.

Remove pad driver / brush and clean
with approved cleaner.

Drain recovery and solution tanks com-
pletely and rinse out with clean water.
Visually check the recovery tank for de-
bris and clean out as necessary.

Raise the squeegee assembly off floor
and wipe it down with a damp towel.

Be sure to store the squeegee in the
up position.

WARNING:

Before performing any maintenance on the machine, be sure that the power is

turned off, or the batteries are disconnected!

WARNING:

Repairs are to be completed by Authorized service centers only. Any repairs

completed by unauthorized persons will not be covered by the warrenty.

Remove the float shut-off assembly
and rinse it out with clean water.

Clean machine with an approved
cleaner and a damp towel.

Recharge the batteries.

Check the condition of the squeegee
blade wiping edge, rotate blade if worn.

4.

5.

6.

7.

Monthly Maintenance

1.

2.

3.

Clean the battery tops to prevent cor-
rosion.

Check for loose battery cable connec-
tions.

Inspect and clean the recovery tank
cover seal.
Replace it if damaged.

Lubricate all grease points and pivot
points with silicon spray and approved
grease.

Check the machine for loose nuts and
bolts.

Check the machine for leaks.

4.

5.

6.

«
...
26
27
28
29
30
...
»

Содержание 20NBL+-OB











































Отзывы:

Нет отзывов