Ice-O-Matic MFI2406LS Series, Руководство по обслуживанию и установке

Страница: 4 / 30

FOR THE INSTALLER: Specifications
The machine is designed to fit a B100 Ice-O-Matic
storage bin with a KBT-26.
Installation Limitations: The machine is designed
for indoor installations only.
Minimum Maximum
Air Temp 50
o
F 100
o
F
Water Temp 40
o
F 100
o
F
Voltage 198 VAC 253 VAC
Water Pressure 20 psi 80 psi
RO Water Limitation: Water conductivity must be
no less than 35 microSiemens/cm.
SPECIFICATIONS:
*Used to determine needed condensing unit
capacity. Not an AC load
Ice-O-Matic ice machines are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.U.L.
Ice-O-Matic assumes no liability or responsibility of
any kind for products manufactured by Ice-O-Matic
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Ice-O-matic.
Ice-O-Matic reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
MFI2406LS
Page 2
15.53"
3.1"
SUCTION LINE CONNECTION 7
8
"
LIQUID LINE CONNECTION 1
2
"
20.84"
9.43"
5.25"
3"
17.8"
18.8"
21.66"
ELECTRICAL INLET
POTABLE WATER INLET 3/8" FLARE
DRAIN 3/4" FPT
BACK VIEW
Model Cabinet Size System Refrigerant BTUH required* Voltage Ice Type
MFI2406RL 42"w x 27"h x 24"d R-404A 12,000 208-230/60/1 Flake