background image

SAFETY AND WARNINGS BEFORE YOU BEGIN

 

WARNING: WHEN INSTALLING THIS GAME, A GROUNDED A.C. RECEPTACLE MUST BE USED. FAILURE TO DO SO COULD 
RESULT IN INJURY TO YOURSELF OR OTHERS. FAILURE TO USE A GROUNDED RECEPTACLE COULD ALSO CAUSE           
IMPROPER GAME OPERATION, OR DAMAGE TO THE ELECTRONICS.

 

NOTE: THIS GAME IS INTENDED FOR INDOOR USE ONLY.

 

DO NOT DEFEAT OR REMOVE THE GROUNDING PRONG ON THE POWER CORD FOR THE SAME REASON AS GIVEN 
ABOVE. USING AN IMPROPERLY GROUNDED GAME COULD VOID YOUR WARRANTY. 

HAVE A QUALIFIED ELECTRICIAN CHECK YOUR A.C. RECEPTACLE TO BE SURE THE GROUND IS FUNCTIONING PROPERLY. 

THIS GAME IS DESIGNED TO DISSIPATE STATIC ELECTRICITY THROUGH THE GROUNDING PLANE OF THE GAME. IF THE 
A.C. GROUND DOES NOT WORK, THE GAME COULD DISCHARGE STATIC ELECTRICITY THROUGH THE GAME CIRCUITRY, 
WHICH COULD CAUSE DAMAGE. 

THE POWER SUPPLY IS NOT VOLTAGE ADJUSTABLE. TO OPERATE THE GAME AT VOLTAGES OTHER THAN THOSE IT WAS 
DESIGNED FOR. PLEASE CONTACT OUR SERVICE DEPARTMENT FOR VOLTAGE CONVERSION INFORMATION. 

WARNING 

DO NOT remove any of the components on the main board (e.g. compact flash and EPROMS) while the game 
is powered on. This may cause permanent damage to the parts and the main board. Removing any main 
board component part while powered on will void the warranty. 

ALWAYS REMOVE POWER TO THE GAME, BEFORE ATTEMPTING ANY SERVICE, 

UNLESS NEEDED FOR SPECIFIC TESTING.  FAILURE TO OBSERVE THIS PRECAUTION 

COULD RESULT IN SERIOUS INJURY TO YOURSELF OR OTHERS.

 

THIS GAME IS NOT SUITABLE FOR INSTALLATION IN AN AREA WHERE A WATER JET COULD BE USED. 

This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced  physical,  sensory  or  mental           
capabilities, or lack of experience and knowledge, unless they have  been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.  Children should be supervised to ensure that they do not 
play with the appliance. 

The game’s foot print is 42.5”  w x 48” d  x 136” h 

AC Power Information

 

The games main fuse is accessed through the back of the game at the power mod.  Above the 
power cord is a small panel that contains the main fuse.  The value of the fuse for 120 volt users 
is  3  AMPS  at  250Volt  type  slow  blow.    The  value  of  the  fuse  for  230  users  is  1.5  AMPS  at 
250Volt type slow blow.  

All manuals and user guides at all-guides.com

Содержание Whack N Win





















Отзывы: