ICE COBOTICS Cobi 18 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 53

background image

34

Autonomous Hard Floor Scrubber Cobi 18

User Manual

Best Practices for Autonomous Mode

Running Routes

1. Preparing the environment is key to successful robotic operation. It is essential to dust mop and remove

temporary obstructions like inventory and other temporary obstructions. Be sure to push back any inventory

that may be sticking out from its intended shelf area.

2. Run routes based on your pre-determined schedule. If that has not been decided, run routes when

employees, customers and freight are not present. Also determine the best time of the day to perform this

task.

3. Do not block the front of the scrubber where the cameras and sensors are mapping the room during use.

Try and stay behind the unit during use.

4. During the start of any robotic route, check the scrubber’s rear squeegee (and optional dry mop) to make

sure they are adjusted properly. Pause the robot by pressing the blue button and adjust the squeegee or dry

mop if necessary.

5. Optimize your run time, water flow and power usage, for daily floor maintenance, use lower water and

power settings for longer water life and battery life.

Replacing Routes

1. If the environment changes significantly through remodel or permanent fixture move it may be necessary to

teach a new route.

2. A new route will be needed when the dimensions of the space have changed so much that the scrubber is

having trouble navigating and is calling for frequent assists. Some common examples of changes that can
necessitate new routes include:
- End caps in retail environments that narrow the aisle.
- Displays in the main areas of the location, blocking its intended path.
- New merchandise displays that might have different dimensions.

3. New dimensions may reveal new floor space that was previously covered causing the current route to miss

this area. Please reteach this route for the new environment.

Manual Mode

1. If you desire to run the scrubber in manual mode you can manually operate from the home location code by

lifting the handle, turning the brushes and the vacuum on operating the unit.

2. You can also do this mid route by pressing the blue button, lifting the handle and operating manually.

«
...
32
33
34
35
36
...
»

Содержание Cobi 18






















































Отзывы:

Нет отзывов

Похожие инструкции для Cobi 18

Бренд: Kärcher Страницы: 136

Бренд: sescom Страницы: 5

KM 85/50 R Bp Pack 80 Ah Li + FC

Бренд: Kärcher Страницы: 390

Бренд: Dycon Страницы: 44

Бренд: Kärcher Страницы: 224

Бренд: Minuteman Страницы: 42

Бренд: Minuteman Страницы: 26

Бренд: Minuteman Страницы: 40

Бренд: Minuteman Страницы: 44

Бренд: Minuteman Страницы: 56

Бренд: Minuteman Страницы: 84

Бренд: Comecta Страницы: 4

cm mini orbital

Бренд: comoc Страницы: 52

Бренд: Fimap Страницы: 8

Бренд: Wetrok Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды