1 4
Manual mode
In manual operation, the capacitor banks can be connected/disconnected
irrespective of system power factor and setting. The capacitors are discon-
nected by pressing key. The capacitors are connected by pressing
key. A delay time of 5 seconds is permanently provided for the
connection/disconnection of the capacitors.
6. Programming Instructions
The power factor controller is provided with four keys for program-
ming purpose. The various functions of the keys are given below
Program mode
Automode
Manual mode
Index key To select P.F, kVar,
Target kVAr,
CT, Alarm status &
Alarm acknowledge
Shift key
Not applicable
Switch off
capactors ( )
Increment key
Not applicable
Switch on
capacitors
( )
Enter key To Select Auto mode To select manual
mode
All power factor controllers are to be programmed properly to work in a
particular installation. The various items that are to be programmed are
shown in the table below.
4
4
4
4
4
44444
↵
AUTO
-
DO
-
4
#
4
4
4
4
4
44444
MAN
