- Alarma de bajo nivel de agua:
Agregue más agua, el nivel del agua puede disminuir a causa
de la evaporación durante la cocción. O sumerja el Roner20
entre las líneas de Max i Min.
- The low water alarm comes on after a few seconds of
operation:
Add more water.
- The pump generates "waves":
Sometimes these waves will cause the water level at the
sensors to fluctuate up and down. Waves sometimes lower
the water level just below the sensor and cause a low water
alarm. This is normal and you just need to add more water.
- The temperature reading does not match an external
thermometer:
The Roner20 is calibrated to a platinum primary scientific
standard that is much more accurate than common
thermometers.
- The error code ERR will appear in the following situation
with an alarm sound:
1. There is no water in the tank.
2. Water below the minimum level.
3. Device in short-circuit situation.
15