ICC OPC-PRT3, Инструкция по эксплуатации, Страница: 33 / 115

ICC
32
6 FUJI CONFIGURATION STUDIO
6.1 Overview
The interface card is discovered, configured and updated by the Fuji Configuration Studio PC application
(refer to Figure 11). The studio typically requires an Ethernet connection for remote discovery, network
setting, configuration, real-time monitoring, and firmware updates. Configuration, real-time monitoring
and firmware updates are also possible via USB. Otherwise, under normal operation, USB should be
disconnected. To obtain the latest release of the Configuration Studio, refer to the
product web page on
the internet or contact technical support. The remainder of this section will provide only a brief
introduction to the configuration concepts. For protocol specific configuration, refer to the relevant
protocol section 10.
Figure 11: Fuji Configuration Studio
Creating a Device Configuration
A device can be added to the Project panel for configuration by first selecting the Device
Configurations list heading and then:
•
Double-clicking on the device in the Available Devices panel.
•
Right-clicking on the device in the Available Devices panel and choosing Add from the context-
sensitive menu.
•
Hitting the <ENTER> key on the keyboard when the device is selected in the Available Devices
panel.
•
Dragging the device from the Available Devices panel into the Project panel.
•
Selecting it and selecting Add Selected Device from the Edit menu.
•
Selecting it and clicking the Add button in the toolbar.
The device will then be added to the list of
Device Configurations .
Going Online with a Device
All connected devices are automatically added to the Discovered Devices panel. This panel is shown
by selecting the Online Devices list heading in the Project panel. To go online with a device:
•
Double-click on it in the Discovered Devices panel.
•
Right-click on it in the Discovered Devices panel and choose Go Online from the context-
sensitive menu.
•
Hit the <ENTER> key on the keyboard when the device is selected in the Discovered Devices
panel.
•
Drag it from the Discovered Devices panel into the Project panel.