LINK5000 series Installation Guide
2-8
otherwise, it will damage the fiber transceiver. Do not stare at the fiber bore when the
switch is in operation. That may hurt your eyes.
2.3.5 Power Supply Connection
LINK5010AS-POE power use requires a stable 110/220VAC connection. Please read
the power input specification for detailed information.
Power supply connection procedure is described as below:
1. Insert one end of the power cable provided in the accessory kit into the power source
socket (with overload and leakage protection), and the other end to the power socket in
the back panel of the switch.
2. Check the power status indicator in the front panel of the switch. The corresponding
power indicator should light. Link5010AS-POE is self-adjustable for the input voltage. As
soon as the input voltage is in the range printed on the switch surface, the switch can
operate correctly.
3. When the switch is powered on, it executes self-test procedure and startups.
Caution!
The input voltage must be within the required range, otherwise the switch can be
damaged or malfunction. Do not open the switch shell without permission. It can cause
physical injury.
