LINK5000 series Installation Guide
2-5
Use standard power sockets which have overload and leakage protection.
Inspect and maintain the site and the switch regularly.
Have the emergence power switch on the site. In case of emergence, switch off the
power immediately.
According to the required standards GB9254-2008 information technology equipment
radio disturbance limits and methods of measurement, information technology
equipment is divided into A level ITE and B level ITE.
A level ITE is the information technology equipment that satisfies A level limit but not
B level limit.
Warning
This is class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Caution!
Potential risks include: Electric leakage, Power supply arcing, Power line breakage,
Overload circuit and Electrical short circuit. If electric shock, fire, electrical short circuit
occurs, please cut off the electricity supply immeditately.
All safety and installation requirements must be followed in order to keep warranty in
place. Any non-compliance can void warranty.
2.2 Installation Preparation
2.2.1 Verify the Package Contents
First, open the package and check the contents of the switch container and
accessory kit. (If you are concerned that any item is missing or an incorrect item has been
supplied, please contact your dealer as soon as possible.)
2.2.2 Required Tools and Materials
The required tools and accessories are shown below:
Cross screwdrivers
Flat-blade screwdriver
ESD wrist strap
Antistatic uniform
