CR IMMO User Manual
32
Available test vary by vehicle manufacturer, year and model.
F. Special Function
In addition to amazing & powerful diagnostic function, the tool also features various
reset functions, which varies from vehicle to vehicle.
7
Maintenance
This module provides an easy dial to quickly access the most commonly performed
service functions as following.
Oil Reset Service
Electronic Parking Brake Reset
Steering Angle Calibration
ABS Bleeding
TPMS (Tire Pressure Monitor System) Reset
Gear Learning
IMMO Service
Injector Coding
Battery Maintenance System (BMS) Reset
Diesel Particulate Filter (DPF) Regeneration
Electronic Throttle Position Reset
Gearbox Matching
AFS (Adaptive Front-lighting System) Reset
Sunroof Initialization
Suspension Calibration
7.1 Oil Reset Service
This function allows you to perform reset for the engine oil life system, which
calculates an optimal oil life change interval depending on the vehicle driving
conditions and climate.
This function can be performed in the following cases:
1.
If the service lamp is on, you must provide service for the car. After service, you
need to reset the driving mileage or driving time so that the service lamp turns off
and the system enables the new service cycle.
2.
After changing engine oil or electric appliances that monitor oil life, you need to
reset the service lamp.
7.2 Electronic Parking Brake Reset
1. If the brake pad wears the brake pad sense line, the brake pad sense line sends
a signal sense line to the on-board computer to replace the brake pad. After
replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
2. Reset must be performed in the following cases:
a)
The brake pad and brake pad wear sensor are replaced.
b)
The brake pad indicator lamp is on.
c)
The brake pad sensor circuit is short, which is recovered.
d)
The servo motor is replaced.
7.3 Steering Angle Calibration
