CR IMMO User Manual
27
Note: If
Original Vehicle Key Obtained
is selected in step 8, the vehicle’s
VIN code, power level and CS code in this step will be automatically obtained.
The user is not required to enter any data to complete the replacement.
5.2.4
Key Programming
This function allows you to backup old key data, write in data for new keys and
detect remote control frequency.
5.2.5
SCM(Single Chip Microcomputer) Programming
This function allows you to read chip (also called MCU) ID, lock/unlock chip,
backup/restore EEPROM data and FLASH data.
Notes:
The data flow is large when performing reading/writing operations. To improve
the communication stability, you are recommended to use a USB cable.
MCU connection could vary depending on MCU types, for information how to
connect the MCU, refer to the onscreen wiring diagram.
6 Diagnose
Two methods are available to access the vehicle diagnostic software.
6.1 VIN SCAN
This function enables you to quickly access the vehicle diagnostic software through
reading the vehicle's VIN (Vehicle Identification Number). For this method, camera
scan and manual input are available.
Tap
VIN scan
, the following screen will appear:
