CR IMMO User Manual
28
A.
Camera Scan: This mode allows you to identify the vehicle model via
scanning the v
ehicle’s VIN.
Once scanning is complete, the tablet will enter the diagnostic software of
the vehicle directly.
B.
Enter VIN: In this mode, input the VIN manually to enter the diagnostic
software of the vehicle.
Input the VIN, and tap
OK
, the tablet will automatically identify the vehicle model
and enter the diagnostic software of the vehicle.
6.2 Manual Selection
In this mode, tap the appropriate vehicle logo, then follow the on-screen
instructions to access the diagnostic software.
Take
DEMO
as an example to demonstrate the basic procedures on how to
diagnose a vehicle.
1). Select diagnostic software version: Tap DEMO to go to Step 2.
2). Select vehicle model (varies with different versions): Select the desired vehicle
model. Here we take Ford for example to demonstrate how to diagnose a vehicle.
3). Turn the ignition key to ON: Set the ignition switch to on.
4). Read vehicle information: After reading the vehicle information, double check if the
vehicle information is correct or not. If yes, tap YES to continue.
5). Select test item: Select the desired test item to proceed.
6.2.1
Health Report (Quick Test)
This function varies from vehicle to vehicle. It enables you to quickly access all
t
he electronic control units of the vehicle and generate a detailed report about
the vehicle
health.
Tap
Health Report
on the test item selection screen to scan the vehicle control
modules. When scanning is complete, the following screen will appear:
