ICARO paragliders Sitta, Руководство пользователя

Страница: 8 / 24

Page 8
1. Slide back the neoprene on the loop of the riser. Undo the loop to knot.
2. Untie the knot of the loop and move steps in mm opposed to the lines. Close
the loop to knot and pull it tight.
3. Check the length of the single straps of the riser and f it does not match make
the same repeated in mm.
4. Then check length of the single strap which you trimmed with length of the
strap of the other riser. When it fits close the loop to knot and pull it very tight.
5. Check once more the length of the single straps of the riser (A, A1, B,C).
6. Is the length of all straps of the riser identical make sure that all lines lie along
the riser and before you pull the Neoprene back over the Loop check again the
loopis closed correctly.
IF THE INDIVIDUAL LENGTH OF THE FOUR STRAPS OF THE
RISER IS NOT WITHIN THE TOLERANCE RANGE OF 5 MM,
START AGAIN AT 1 TO 6.
MAKE THE SAME ON THE SECOND RISER.
THE LENGTH OF THE INDIVIDUAL STRAPS MUST BE THE SAME
ON BOTH RISERS.
THEREFORE COMPARE EACH A, A1, B AND C STRAP OF THE
LEFT RISER WITH A, A1, B AND C STRAP OF THE RIGHT RISER.
1 2
3
4
5
6