14
SOS dial 1
* password * 21 * preprogram number #
SOS dial 2
* password * 22 * preprogram number #
SOS dial 3
* password * 23 * preprogram number #
Setup confirmation
* password * 30 *#
One-way communication
* password * 40 * preprogram number #
Message setup 1
* password * T1 * preprogram number #
Message setup 2
* password * T2 * preprogram number #
Message setup 3
* password * T3 * preprogram number #
Message setup 4
* password * T4 * preprogram number #
SOS Message setup
* password * T5 * preprogram number #
Important Note:
You must setup the First SOS dialers number in order to receive a confirmation SMS for each
setup afterwards.
* Setup SOS receivers (1)
Step one: Access to “write message” function in mobile phone with display, enter
“*password*21*number#”. (Original password is 0000).
Step two: For example, if your password is 0000 and the first receiver number is
0915111111. Then you enter “*0000*21*0915111111#”
Step three: Send the message to S SERIES Security Phone. When the LED light is on,
setup is completed. A confirmation message will send to the pre-programmed first
receiver in a few seconds.
4-1 Receiving / End calls
When the phone rings (or vibrates):
Step one: press Receiving/Dialing’’ button
Step two: press “Power off / on’’ button to end a call
End Call/Power On-Off On
Receiving/Dialing Button
