myDVR1630/930 Operational Guide
port numbers, unless other IP sharing devices sit in-between the client and the
DVRs.
To access the DVR, you must have the following information:
Table 3.7.1.1 Information needed for network access
When accessing from the same LAN
When accessing from outside the LAN
DVR’s IP address
The Router, or Gateway IP address (IP
address sharing device).
RTSP port number
RTSP port number
HTTP port number
HTTP port number
Username Username
Password Password
3-7-2. Network types
Configure one of three network types:
LAN, DHCP, and ADSL. Each type requires different settings.
LAN
To use the LAN option when connecting the DVR to a network, the following
information is required. If you do not have this information, see your network
administrator.
Table 3.7.2.1. Network Parameters for LAN
Item Description
IP
The fixed IP address of the DVR
GATEWAY
The IP address of the gateway
SUBNET MASK
The subnet mask for the LAN
DHCP
Select DHCP
(for Dynamic IP Addressing)
to enable this feature. The DHCP server or
a router automatically assigns the unit an IP address and other appropriate TCP/IP
settings. After connecting to the network, view the assigned IP address by selecting
DESCRIPTION
from the
SYSTEM
menu.
If the network connection does not afford additional IP addresses, use an IP sharing
device to remedy the problem. Port forwarding may be necessary in order to connect
Preliminary
31
Content subject to change without notice.
