myDVR1630/930 Operational Guide
Event Alarm
Setting to “ON” sends an e-mail upon an alarm event.
Mail Address
Input the designated recipient’s address.
Mail Server Name
Enter the name of your SMTP server.
ID
Enter your SMTP server user ID.
Password
Enter your SMTP server password.
Return Address
Warning
: Some incoming e-mail servers block e-mail
reception from un-verified return e-mail addresses. Enter a
valid e-mail address associated with the passwords above.
Figure 3.7.1. Network setup screen
3-7-1. Ports
Port Forward for access from a WAN
When one or more DVRs are connected through a IP sharing device (i.e. router) to a
larger network (i.e. the internet), in order to access each unit from outside the local
area network, each device must have a unique RTSP (Real Time Stream Protocol) and
HTTP port number. You must also configure your IP sharing device for port
forwarding, so that each port, when accessed on the IP sharing device, will forward to
the appropriate DVR’s IP and or MAC address. The port number is listed next to the
Port menu option in the Network menu
. If you only plan to access multiple units
from within a local area network, you do not need to change the RTSP and HTTP
Preliminary
30
Content subject to change without notice.
