iCanServer440R User’s Guide
y
Relay out :
It is used for connecting external alarm generators such as sirens, flashing light,
etc. When activated, relay output configures a closed circuit. Two Relay
outputs(A, B) are provided.
y
Alarm Input : There are provisions for 4 alarm sensor device connections. They are used
for connecting external alarm sensors such as the
infrared sensors, heat
sensor, magnetic sensors, etc.
y
Power Connector:
Power input of iCanServer440R. 12V/3A
2.4. PC Requirements
AV streaming data from iCanServer440R can be observed through iNVR program which is a
viewing & recording program running on a PC. Minimum requirement of the PC is described
below:
Items
Minimum
Recommended
CPU
Pentium III 700
Pentium IV 1.2G above
Main Memory
128 MB
256MB above
Operating system
*
Windows 98 SE.
Windows 2000 or later
Web browser
Internet Explorer 5.0
Internet Explorer 5.0 or later
Resolution
1024 X 768
1600 X 1200
Network
10 Base-T Ethernet
10/100 Base-T Ethernet
* Operating Systems supported : Windows 98 Second edition,
Windows NT Workstation 4.0 (SP 5.0 OVER)
Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information
you are recommended to refer to pertinent documentations provided with the product or refer to
iCanTek’s home page (http://www.icantek.com).
1.
Install “IP installer” and “iNVR” on your PC.
Detailed information for installing these programs can be found in
[IP-Installer User’s
Guide]
and
[iNVR User’s Guide]
, respectively.
Rev.2.0 (Aug. 2004)
11
Содержание iCanServer440R
Страница 1: ...iCanServer44R User s Guide Rev2 0 Aug 2004...
Страница 39: ...iCanServer440R User s Guide Rev 2 0 Aug 2004 39...
