iCable System ICS-G302, Руководство оператора, Страница: 51 / 63

Page 51
3.11 SIP Settings Page
To enable VoIP function, this S-MTA should be registered to the proxy server of
ISP. At this page, you can configure most of information needed to register to the
proxy server.
[NOTE] In case PC is connected to this S-MTA and you want to use PC’s client
program using SIP protocol such as UBP phone, you should change
“Local SIP port” and “Local RTP Start Port” of this S-MTA with
different value that are used in your PC’s client program.
Proxy Server IP (or Domain) Fill the Proxy Server IP Address or FQDN.
Proxy Server Port
Primary outbound proxy
Fill the port number of Proxy Server. The default
value is 5060.
( Use outbound proxy
( only if the outbound proxy is used)
Primary outbound proxy server
( Use proxy as registrar
( If proxy is equal to register server )
Register Server IP (or
Domain) Fill the Register Server IP Address or FQDN. If
Register Server is the same with Proxy Server,
please fill the same address with Proxy Server.
Register Server Port Fill the port number of Register Server. The
default value is 5060.
re-Register Interval Fill the re-Registration interval.
Session Expires The session is expired
Local SIP Port The local SIP port number of S-MTA. This is a
receiving port number of SIP messages.
Local RTP Start Port This S-MTA uses 4 RTP/RTCP port number
starting from this value. If your PC program uses
the same value with this S-MTA, please change