iCable System ICS-G302, Руководство оператора

Страница: 44 / 63

Page 44
The ADD button means that the added or inserted record is saved in the volatile
memory like SDRAM, so this record remains temporarily, not permanently. Please
click the
Save button to save your modifications into a flash memory with a
permanent use.
The figure above shows the reserved port information for the static routing by
the static IP masquerade and UPnP CP running on your PC if your PC supports
UPnP CP function like Windows XP.
3.8 Port Triggering
The following figure shows the web page to set the Port Triggering. The IP address
of the computer that sends the matching data is remembered by the Router, so that
when the requested data returns through the Router, the data is pulled back to the
proper computer by way of IP address and port mapping rules.
Application
Name Enter the application name of the trigger.
Protocol Select protocol of the triggered port and Incoming port. You can
select TCP, UDP or Both.
Trigger Port
Range For each application, list the triggered port number range.
Check with the application documentation for the port number
needed.
Incoming Port
Range For each application, list the forwarded port number range.
Check with the application documentation for the port number
needed. When finished making your changes on this tab. click
the Save button to save these changes