iCable System ICS-G302, Руководство оператора

Страница: 35 / 63

Page 35
3.4 LAN/UPnP Page
LAN/IP Configuration
S-MTA could be operating in two modes: Router Mode or Bridge Mode. If
Bridge Mode is selected, Router function does not work. Bridge Mode can be used
when router function of the ADSL Modem, Cable Modem or Broadband Router is
used. In Bridge Mode, DHCP Server, NAT and UPnP do not work.
Router Mode is set to by default mode. DHCP Server, NAT work together.
DHCP Server : DHCP Server works only when Router Mode is set.
You can change the IP address of LAN-side. When you connect this S-MTA to a
broadband router, and if this S-MTA and a broadband router use the same class of IP
address, please change this S-MTA’s LAN-side address.
LAN Side IP Address Please fill the LAN-port IP address.
(default value : 192.168.100.1)
Local Subnet Mask Fill the subnet mask of LAN-port.
(default value : 255.255.255.0)
DHCP Server Configuration
Server IP Fill the DHCP server IP address.
(default value : 192.168.100.1)
Server Subnet Mask Fill the subnet mask of IP pool.
(default value : 255.255.255.0)
Gateway IP Fill the gateway IP address.
(default value : 192.168.100.1)
Start IP Fill the start IP address of IP pool that DHCP server
manages. (default value : 192.168.100.2)