BEFORE YOU START
BEFORE YOU START
6
1. The battery of LS810-B is a built-in rechargeable
lithium-ion battery, the battery current is 420 mAh.
2. Please use the USB cable to charge
the battery, just like the following picture:
Power Supply and Charge Power
Charging the power under following circumstances:
displays on the LCD
The LCD display dims
When powering on the monitor, the LCD doesn’t light up.
CAUTION
1. The battery of the LS810-B is a built-in rechargeable lithium-ion battery;
please do not disassemble by unauthorized maintenance personel.
2. Under normal use, it can be charged about 300 times.
If the battery cannot charge the power normally or the blood pressure
monitor cannot be used normally, please connect with the authorized
maintenance personel. If measured three times per day, and the battery
is fully charged, it can be used for about 20 days.
3. Store and use the blood pressure monitor in a cool, dry, and
ventilated environment. Avoid close proximity to fire and extreme heat
or it can cause the battery to explode.
4. You can only use the IC Science’s authorized USB cable to
charge the power. You cannot use the blood pressure monitor during
charging.
5. During charging, the blood pressure monitor displays the symbol:
When the charging is finished, please unplug the device.
6. When charging, do not touch the charging connector and the patient
simultaneously.
7
Setting Date and Time
2
.As pictured in the right, the
blinking numeral representing
[HOUR]. Press “MEM” button to
change the numeral. Each press
will increase the numeral by one
in a cycling manner.
1.When the monitor is OFF, press
and hold “SET” button for 3
seconds to enter Time Setting
Mode.
3
.Press “SET” button again to
confirm [HOUR]. Then the
numeral representing [MINUTE]
blinks.
Please proceed to time setting before your initial use to
ensure each piece of recorded information is labled with a
time stamp. (Year Range: 2012-2052; Time Format: 12 Hours)
When you get the Blood Pressure Monitor, the first thing
you must do is to activate it. Please press and hold the SET
button to activate it, then it will enter the setting mode.
Activate Your Blood Pressure Monitor
Download and install My BP Coach from
iTunes Store or Google play
