IC Realtime Max 8, Руководство пользователя

Страница: 50 / 140

©2009 IC Realtime, Inc. 50
PTZ and decoder connection is in place. Decoder address setup is right.
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/Tilt Control ,. The interface is
shown as in Figure 4-28. Here you can set the following items:
Channel: select the current camera channel.
Protocol: select corresponding PTZ protocol(such as PELCOD)
Address: default address is 1.
Baud rate: select corresponding baud rate. Default value is 9600.
Data bits: select corresponding data bits. Default value is 8.
Stop bits: select corresponding stop bits. Default value is 1.
Parity: there are three options: odd/even/none. Default setup is none.
Figure 4-28
After completing all settings please click save button.
In single window display mode, right click mouse (or “Fn” on the front panel or
press “Fn” on the remote control) to highlight pan/tilt/zoom sub menu. See Figure
4-29.
Figure 4-29
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 4-30.