IC Realtime Max 8, Руководство пользователя

Страница: 41 / 140

©2009 IC Realtime, Inc. 41
Figure 4-13
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
Set redundant disk(s) as read-only disk or read-write disk (Main menu-
>Advanced->HDD management). See Figure 4-13.This change will require a
reboot. You can now search or playback from the redundant disk.
Dismantle the disk and play it in another PC.
4.5
4.5 4.5
4.5 Detect
Detect Detect
Detect
4.5.1
Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface.
See Figure 4-14. There are three detection types: motion detection,
video loss, camera masking.
4.5.2
Motion Detect
Detection menu is shown as below. See Figure 4-14.
Channel: select the channel you want to configure for motion detection.
Event type: from the dropdown list you can select the detection type.
Record Channel: select the channel to activate recording function once the
detection occurs. Make sure you have set MD record in the schedule menu
(Main Menu->Setting->Schedule
Latch: when detection is complete, the auto trigger continues detecting for a
specified time. The value ranges from 10-300 seconds
Region: Select region from Figure 4-15 and you can specify a motion detection
zone. There are 396(PAL)/330(NTSC) small zones.
Sensitivity: Ranges from 1-6. 1 is the lowest and 6 is the highest level of
sensitivity.
Show message: You can choose to pop up a message to alarm you in the local
screen.
Send email: System can send out email to alert you when alarm occurs. .