IC Realtime ICIPD1300VIR Скачать руководство пользователя страница 25

Страница: 25 / 32

The device reserves two cable exits. The pin diameter shall be less than 15mm. One of the cable exits

has M22 screw thread and can work with the default combination cable to remove the risk of the

dragging and pulling of the cable.

The device has two waterproof airproof plugs (One default position is the cable exit of the chassis of the

device and the other is in the accessories bag.). The waterproof airproof plug has two functions. One is

to fill in the cable exit and pull through the cable. It supports the cable whose diameter ranges from

4.0~6.0. It is very convenient for you to do the waterproof work when you pull the cable through your

own exit. Please refer to the steps listed.

Step 1

Take the waterproof airproof plug out, pull the cable (diameter ranges from 4.0 to 6.0) through the

waterproof airproof plug. See Figure 3-10.

Figure 3-10 Cable connection

Step 2

Before you go to the Step 4 in the chapter 3.2.1 installation steps, please pull through cable with the

waterproof airproof plug to the device chassis via the installation hole at the bottom of the chassis and

then connect the cable pins.

Step 3

Refer to Step 4 and Step 5 in the chapter 3.2.1 installation steps to install and connect the cable pin to

the device and then follow the proper steps to go on the installation.

Important

This series product has the power connection pin and I/O connection pin for you to pull through

the signal cable.

3.3

Micro SD Card Installation

Warning!

Please unplug the device power cable and then shutdown the device before you install the Micro

SD card.

Step 1

Please refer to Step2 in chapter 3.2.1 installation steps to open the device protection enclosure.

Содержание ICIPD1300VIR

































Результаты поиска

Содержание ICIPD1300VIR

Отзывы:

Похожие инструкции для ICIPD1300VIR

Бренды по названию

Популярные бренды

IC Realtime ICIPD1300VIR, Руководство пользователя

Результаты поиска

Содержание ICIPD1300VIR

Отзывы:

Похожие инструкции для ICIPD1300VIR

Бренды по названию

Популярные бренды