IC Realtime ICHD850VDIR, Инструкция по эксплуатации

Страница: 7 / 16

12
13
5. Installation 6. Name and function of each part
5-7. Installation overview
The ceiling tile should be applied for only when there is an additional support available for it to
hold the camera with enough strength after the installation.
Take it off after drilling the mounting hole on the guide.
Pease make sure to attach the moisture protection sponge securely on the back of the base.
Warranty is void if it is not attached properly.
Pre-installation of the base is possible.
Mounting holes are compatible to the industry standard 2-gang electric junction box.
Screws are supplied in the package.
The camera set is separated from the base with the supplied 2 mounting screws.
Dome cover is externally revolved with hand for multiple uses. Press the dome and turn it to a
clear part with hand when the existing part of the window is scratched or contaminated.
No need to disassemble the dome for this job.
① CVBS Output
Composite video signal out.
② HD-SDI Output
HD-SDI video signal out.
③ RS-485 Signal Out (see page 22)
To control camera functions remotely via RS485
communication.
<Pelco-D> protocol built-in.
Cable connection should be made in correct polarity of
plus (+) and minus (-).
④ OSD Function Key
OSD control.
⑤ Power Input
Connect to the power source.
Polarity of the power is self- configured. (Non-polarity).
HD-SDI
* IR LED & 2AXIS
(OPTION)
Star Wrench
Tamper resistant Screw
MS M4xP0.7x15L
Dome-Ass’y
Screw Fixed
PH MS M4xP0.7x8L
Camera Set
4x30L-4ea
Tapping Screw
Base
Dust & Moisture
protectine Sponge
Drilling template
Ceiling Tile
Adaptor Plate
(option)
2 gong Junction box
(Industrial standard)
Video
Power
①
②
③
④
⑤