IC Realtime ICHD850VDIR Скачать руководство пользователя страница 2

Dear Customers!

INFORMATION 

By selecting this product, you have decided to use a professional device that guarantees 
highest quality and reliability. We would like to thank you very much for your confidence and 
kindly ask you to read the following instructions carefully before Installation and operation in 
order to take full advantage of all quality features regarding this product.

CAUTION

CAUTION

RISK OF ELECTRIC 

SHOCK

TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE THE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED PERSONNEL. 

The lighting flash with an arrowhead symbol, within an equilateral 
triangle is intended to alert the user to the presence of uninsulated 
dangerous voltage within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

This equipment has been tested and found to comply with limits for a Class A digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the 
interference at his own expense. 

WARNING 

Changes or modifications not expressly approved by the manufacturer could void the user’s 
authority to operate the equipment.

CAUTION – 

To prevent electric shock and risk of the fire hazards 

   Do NOT use power source other than that specified.
   Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to 

all local codes.

2

3

Table of contents

1. Precautions ------------------------------------------------------------- 4

2. Limitation of liability --------------------------------------------------- 5

3. Disclaimer of warranty ----------------------------------------------- 5

4. Package ----------------------------------------------------------------- 6

5. Installation --------------------------------------------------------- 7~12

5-1. How to separate the camera-self from the base.
5-2. How to reposition the camera-set onto the base.
5-3. How to reposition the cable from the back to the side of base
5-4. How to adjust the Zoom/Focus
5-5. How to adjust the camera angle
5-6. How to connect the power
5-7. Installation overview

6. Name and function of each part ---------------------------------- 13

7. Functions and operation -------------------------------------- 14~23

7-1.   On Screen Display Menu
7-2.   Setting up the menu
7-3.   VIDEO OUT
7-4.   AUTO MENU SET
7-5.   DAY / NIGHT
7-6.   AWB
7-7.   AE
7-8.   PRIVACY
7-9.   EFFECT
7-10. SYSTEM
7-11. INITIALIZE
7-12. EXIT

8. Trouble shooting guide -------------------------------------------- 24

9. Dimension (mm) ----------------------------------------------------- 25

10.Specification --------------------------------------------------------- 26

Содержание ICHD850VDIR

















Отзывы: