IC Medical HT-200, Руководство по эксплуатации

Страница: 20 / 48

2. Start-up 20
2.2.2 Synchronisation with the USB radio dongle
A synchronisation is only necessary in wireless operation. Proceed
as described in
„2.2 Use of the keyboard via radio (wireless)“ on page
16 . To connect the keyboard and the USB radio dongle, you need
to synchronise them. This process is only necessary during the first
start-up.
To do so, proceed as follows:
1
Switch the keyboard on and place this as close as possible to the
USB radio dongle (approx. 15cm).
2
Keep the fn key pressed and also press the sync key. The LED
above the sync key starts to flash. If the LED lights up permanently,
the synchronisation has been completed and the keyboard is ready
for use. The LED goes out after a short space of time. If the LED
should flash in a faster rhythm, the synchronisation process has been
terminated. Please check the USB radio dongle as described in