preliminary
preliminary
iC-PZ AN1
GETTING STARTED GUIDE iC-PZ
Rev A1, Page 1/10
CONTENTS
1
GENERAL SETUP AND REQUIREMENTS
2
3
4
5
5
Mechanical coarse adjustment . . . . . . . .
5
Mechanical fine adjustment . . . . . . . . . .
5
6
Filter configuration . . . . . . . . . . . . . . .
6
Automatic analog adjustment . . . . . . . . .
7
Automatic digital adjustment . . . . . . . . .
7
Automatic eccentricity adjustment (optional) .
8
9
Filter configuration for system development .
9
Port configuration and output signals . . . . .
9
BiSS Reader Software . . . . . . . . . . . . .
9
10
INTRODUCTION
The iC-PZ is an EncoderBlue
®
lensless reflective opti-
cal encoder IC featuring integrated HD Phased Array
photosensors and a blue LED in an OptoQFN32 pack-
age. It is designed for high-resolution absolute position
measurement without the need for highly accurate align-
ment of each encoder system. To achieve this goal,
numerous automatic calibrations are implemented.
This application note discusses the proposed adjust-
ment procedure both for the development phase and
mass production.
Complete information on the iC-PZ is available at
Copyright
©
2019 iC-Haus
