3
5. Setup / commissioning
___________________________________________________
5.1.
Securing the device / stability
The device must be installed in a stable, horizontal position on a solvent-resistant floor.
5.2.
Space required
The device may be placed against a wall. There should be a clear area of approx. 1.5 m in front
of the device.
5.3.
Acceptable ambient conditions
The device will work optimally at temperatures between -15°C and +40°C.
5.4.
Preventing electrostatic charge
5.4.1. IBS pump
Any electrostatic charge in the pump is discharged via the protective earth conductor for the
pump motor.
5.4.1.1.
Parts Cleaning Device
The Parts Cleaning Device must be connected to an equipotential bonding system (which is
connected to the building's earth connection) at the point marked. This work should be carried
out by a qualified electrician.
5.4.1.2. Electrical connection by the customer
Installation at the customer's premises must be carried out by an approved electrician in
accordance with VDE requirements and any applicable power supply company
regulations.
The electrical supply line must be installed in accordance with the regulations and must comply
with the information (Technical data) given in the operating instructions.
5.5.
Additional equipment
5.5.1. IBS collecting tray (see 9. Accessories list)
This type-tested tray prevents solvents from seeping into the floor.
5.5.2. IBS exhaust system (see 9. Accessories list)
5.6.
Disposal
The device is constructed primarily from steel (except the electrical components) and should
be disposed of in accordance with the applicable local environmental regulations.
Contaminated parts (e.g. hoses, cleaning brushes, cleaning cloths, etc.) should be disposed
of in accordance with the applicable environmental regulations.
Please contact IBS Scherer GmbH if you have any questions.
