IBP A40, Инструкция по эксплуатации

Страница: 41 / 104

13
Hold the bottom part of the wrist cuff as illustrated in fig. 3.
Pull the cuff tight and wrap it upwards so that there is no
gap between the cuff and your wrist.
While you wrap the cuff upwards, hold the cuff cover with
your thumb.
Wrap the cuff around your wrist to suit its form. The blood
pressure reading will be correct even if you wrap the cuff
askew. If the cuff is not wrapped tight enough, the pressure
will be falsely higher and the wrist go numb. Correct
measuring is then not possible.
If you cannot place the cuff around your left wrist and the
blood pressure measurement is not possible on the left wrist,
place the cuff around the right wrist. Proceed as illustrated
in fig. 4 on the right.
c)
d)
e)
f)
fig. 4
fig. 3
making a blood pressure measurement 7
A40 Englisch 27.07.2003 15:39 Uhr Seite 13