IBOS CamBoss, Оригинальная инструкция по эксплуатации

Страница: 16 / 20

CamBoss
15 / 19
Type plates
The type plates with the appropriate serial number are found on each component. You need
this information if you are contacting IBOS a.s. (like when ordering accessories or spare parts).
Within the table, record the serial number for each system component, so that it is available
if necessary.
Organizational measures
The CamBoss inspection system is designed as the state-of-the-art device and according to the
recognized safety and technical rules. However, its use may create some risks to the health
and life of the user, animals or third parties, as well as risk of damage to the inspection system
itself and other material.
Personnel responsible for the works with inspection system must fully read and understand
these operating instructions before commencing the works. This is especially true for
personnel who only work occasionally with the inspection system, e.g. for maintenance, repair
or expansion of equipment.
The operator of the inspection system shall ensure safe and no-risk operation. This can be achieved,
for example, by the following measures:

Keep the operating instructions in place at all times of the inspection system
deployment;

Provide regular training;

Execute the checklist instructions for system maintenance;

Regularly inspect the personnel to ensure that they are aware of safety and risks.
Prevention of material damage
As the operator of the CamBoss inspection system, you are responsible for the observance of
the following points:

Use the inspection system only for the works, for which it is intended;

Observe the deployment conditions for this inspection system, as described in
this user manual.