17
effect. Check the motor.
PRESSCURE SWITCH INSPECTION
Plug the pressure tap chamber located in the rubber tank, press it down
to create pressure and listen to hear if there is a click indicationg that the
motor has switched on. If there is no click, also check that the air
chanber of the pressure switch pipe nozzle does not leak.
If the applinance is switched on , the motor should start running.
Before performing this operation, check that the opening or inside of the
pressure tap chamber are not blocked.
DISPOSAL OF THE DEVICE:
The used product is subject to the obligation of disposal as
waste only in separate collection of waste organized by the
Network of Municipal Electricity and Electronic Waste
Points. The consumer has the right to return the used
equipment in the network of the electrical equipment
distributor, at least free of charge and directly, provided that the returned
device is of the proper type and performs the same function as the newly
purchased device.
Year of marking the device with the CE mark ...................................
(enter the seller from the device's rating plate)
EC DECLARATION OF CONFORMITY
(Moduł A):
1. Pumps: SANIBO 4
2. PHU Dambat, Gawartowa Wola 38, 05-085 KAMPINOS, POLAND, e-mail:
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Pumps form point 1.
5. Under the Act of 30 August 2002 on the conformity system (Journal of Laws of 2004, No. 204 item 2087) we declare with
full responsibility that pumps included in the point 1. to which this declaration refers to are consistent with the following
guidelines of the Council on legal regulations unification in member states of EC:
−
MD Nr. 2006/42/EC
Applied standards: EN 809:1998 + A1:2009
−
LVD Nr. 2014/35/UE
Applied standards: EN 60335-1:2012+AC:2014, EN 60335-2-41:2003+A1:2004+A2:2010
−
EMC Nr. 2014/30/UE
Applied standards: EN 55014-1:2006+A1
：
2009+A2:2011, EN 61000-3-2:2014
