IBO QB-60 Скачать руководство пользователя страница 6

STORAGE:

The   pump   and   booster   set   must   be   protected   against   frost.   All   and   any   damage 
resulting from frost is not subject to warranty repair.
If the device is placed in a non-heated room in the winter season and it is not used, it 
must be disassembled and the water inside it must be drained. Due to the fact that 
some water may remain in the pump, it is recommended to store the device in a room 
with positive temperature.

If the pump or booster set is not used for a period exceeding one day, it must be  
unplugged.   It   must   be   remembered   that   in   case   of   absence   of   the   household 
residents, any leakage that can occur in the home water system or suction installation 
will result in booster pump switching on which can lead to flooding of the house or, in 
case of leakage in the suction installation - to pump failure.
Damage resulting from installation leakage are not subject to warranty repairs.

QB-60, WZ, WZ, WZC, WZCH, WZI type pumps require unclogging after a standstill 
period without water. Clogging results from sticking of the rotor to the housing due to 
the water sediments resulting from evaporation. In order to unclog the pump, move the 
pump shaft before starting the device. To facilitate this, insert a flat screwdriver in the 
shaft slit visible in the central part of the fan casing. If unclogging by means of a 
screwdriver is impossible, remove three screws securing the rotor casing, remove the 
cover revealing the rotor and turn it several times.

DEVICE DISPOSAL:

The used product is subject to disposal as wastes only in selective waste collection 
systems   organised   by   the   Netowrk   of   Communal   Electric   and   Electronic   Waste 
Collection   Centres.   The   customer   is   entitled   to   return   the   used   equipment   to   the 
network   of   the   electric   equipment   distributor,   at   least   for   free   and   directly,   if   the 
returned device is of proper type and fulfils the same function as a newly purchased 
device.

Device CE marking year............................................................

(entered by the seller based on the device rating plate)

6

Содержание QB-60








Отзывы: