IBM xSeries 300, Руководство по техническому обслуживанию аппаратной части

Страница: 74 / 120

Error Code/Symptom FRU/Action
217-XXX-001
(Failed BIOS Fixed Disk test)
Note:
If RAID is configured,
the fixed disk number refers
to the RAID logical array.
1. Fixed Disk 2
217-XXX-002
(Failed BIOS Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
1. Fixed Disk 3
264-XXX-0NN
(NN = SCSI ID of failing
Tape Drive)
1. Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
2. SCSI or power cable connected to the tape drive with SCSI ID NN
3. Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
tape drive’s User Guide.
4.
I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
determine of SCSI bus is functioning properly.
264-XXX-999
(Errors on multiple tape
drives, see error text for more
info)
1.
See error messages/text in the PC Doctor error log for detailed information on
each individual tape drive error.
301-XXX-000
(Failed Keyboard test)
1. Keyboard
405-XXX-000
(Failed Ethernet test on
controller on the System
Board)
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
405-XXX-00N
(Failed Ethernet test on
adapter in PCI slot N)
1. Adapter in PCI slot N.
2. System Board
415-XXX-000
(Failed Modem test)
1. Cable
2. Modem
3. System Board
Error symptoms
General FRU/Action
CD is not working properly.
1. Clean the CD.
2. Run CD-ROM diagnostics.
3. CD-ROM Drive
CD-ROM drive tray is not
working.
(The server must be
powered-on.)
1. Insert the end of a paper clip into the manual tray-release opening.
2. Run CD-ROM diagnostics.
3.
CD-ROM Drive
66
Hardware Maintenance Manual: xSeries 300