IBM X40i - NetVista - 2179, Руководство пользователя

Страница: 72 / 104

CD-ROM, DVD-ROM, or CD-RW drive problems
Symptom Action
An audio or
AutoPlay- enabled
disc does not
automatically play
when inserted into
the drive. Make sure you have the Windows AutoPlay feature enabled. To
enable the AutoPlay feature, do the following:
1. From the Windows desktop, double-click My Computer .
2. In the My Computer window, double-click Control Panel .
3. In the Control Panel window, double-click System .
4. In the System Properties window, click the Device Manager
tab.
5.
Double-click the
CD-ROM, DVD-ROM, or CD-RW
list item
and then double-click the listed CD-ROM option.
6. In the Properties window, click the Settings tab.
7. Under Options, select the Auto insert notification check box.
8. Click OK to exit from the Properties window and save the
setting.
If this procedure does not correct the problem, run the
diagnostic programs (see “Running the IBM Enhanced
Diagnostics program” on page 70). If you need technical
assistance, see “Chapter 7. Getting information, help, and
service” on page 75.
A CD disc does not
work.
v
Verify that the disc is inserted correctly, with its label up.
v
Make sure that the disc you are using is clean. To remove
dust or fingerprints, wipe the CD with a clean, soft cloth from
the center to the outside. Wiping the CD in a circular
direction might cause loss of data.
v
Verify that the disc you are using is good and not scratched
or damaged. Try inserting another disc that you know is
good. If you cannot read from a known-good disc, you might
have a problem with your drive. Check that the power-supply
cable and signal cable are securely connected to the drive (see
“Chapter 5. Installing options” on page 39 for cover removal
instructions).
v
Use the Configuration/Setup Utility program to verify that
the drive is enabled (see “Chapter 4. Using the
Configuration/Setup Utility program” on page 33).
If these actions do not correct the problem, run the diagnostic
programs (see “Running the IBM Enhanced Diagnostics
program” on page 70). If you need technical assistance, see
“Chapter 7. Getting information, help, and service” on page 75.
56
User Guide