IBM X40i - NetVista - 2179, Руководство пользователя

Страница: 52 / 104

If both the power-on and administrator passwords are set, you can type either
password. However, to change any configuration settings, you must use your
administrator password.
Setting, changing, and deleting a password
To set, change, or delete a password, do the following:
Note: A password can be any combination of up to seven characters (A- Z, a-z,
and 0-9). To set a power-on password, an administrator password must
be set.
1. Start the Configuration/Setup Utility program (see “Starting and using the
Configuration/Setup Utility program” on page 33).
2.
From the Configuration/Setup Utility program menu, select System
Security and press Enter. Press F1 for help when setting, changing or
deleting passwords.
Using Security Profile by Device
Security Profile by Device is used to enable or disable user access to the
following devices:
Diskette Drive Access When this feature is set to Disable , the diskette drive cannot
be accessed.
Diskette Write Protect When this feature is set to Enable , all diskettes are treated as
if they are write-protected.
Hard disk Write Protect When this feature is set to Enable , the hard disk is
write-protected.
IDE controller When this feature is set to Disable , all devices connected to
the IDE controller (such as hard disk drives) are disabled
and will not be displayed in the system configuration.
To set Security Profile by Device, do the following:
1. Start the Configuration/Setup Utility program (see “Starting and using the
Configuration/Setup Utility program” on page 33).
2. From the Configuration/Setup Utility program menu, select System
Security and press Enter.
3.
Select Security Profile by Device and press Enter.
4.
Select the desired devices and settings and press Enter.
5.
Press Esc twice to return to the Configuration/Setup Utility program menu.
6.
Select Save Settings from the Configuration/Setup Utility menu and press
Enter. Then press Esc and follow the instructions on the screen to exit from
the Configuration/Setup Utility program.
36
User Guide