IBM x3800 - System - 8865, Руководство по установке

Страница: 22 / 88

Removing the front cover (tower model only)
To remove the front cover, complete the following steps.
Unlock
Lock
1. Read the safety information that begins on page v and “Installation guidelines”
on page 7.
2. If you are installing or replacing a non-hot-swap component, turn off the server
and all peripheral devices. Disconnect all power cords; then, disconnect all
external cables from the server.
3. Unlock the front cover; then, grasp the top corners of the front cover and pull it
away from the server.
4. Lift the front cover to release the two tabs at the bottom edge of the cover.
5. Store the front cover in a safe place.
Removing the top cover
On a tower model, make sure that you unlock or remove the front cover before you
remove the top cover.
To remove the top cover, complete the following steps.
10
IBM System x3800 Type 8866: Installation Guide