IBM x3655 - System - 7985, Руководство пользователя, Страница: 75 / 118

1. Read the safety information that begins on page v and “Installation guidelines”
on page 23.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables. Slide the server out of the rack and remove the cover (see
“Removing the cover” on page 26).
3. Place your thumbs on the metal tabs of the fan-bracket-assembly levers and
pinch the tab and blue release latch together; then, raise the levers, raising the
fan-bracket assembly.
4. Grasp the levers and lift the fan-bracket assembly out of the server.
Installing the CD/DVD drive
To install a CD/DVD drive, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 23.
2. Make sure that the server and peripheral devices are turned off, and that the
power cords and all external cables are disconnected. Remove the server from
the rack and remove the cover (see “Removing the cover” on page 26).
3. Follow the instructions that come with the drive to set any jumpers or switches.
Alignment pins
Drive retention clip
4. Attach the drive retention clip to the side of the drive.
5. Slide the drive into the CD/DVD drive bay until the drive clicks into place.
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation.”
Completing the installation
To complete the installation, complete the following steps:
1. If you removed any air baffles, replace the air baffles (see “Installing the air
baffle” on page 30).
2. If you removed the riser-card assembly, replace the riser-card assembly (see
“Installing the riser-card assembly” on page 28).
3. If you removed the server cover, replace the server cover (see “Installing the
cover” on page 62).
4. Install the server in a rack. See the Rack Installation Instructions that come with
the server for complete rack installation and removal instructions.
Chapter 2. Installing optional devices
61