IBM x3655 - System - 7985, Руководство пользователя, Страница: 41 / 118

Access holes
Release tabs
To remove the riser-card assembly, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 23.
2. Make sure that the server and all peripheral devices are turned off, and that the
power cords and all external cables are disconnected (see “Turning off the
server” on page 13); then, remove the cover (see “Removing the cover” on
page 26).
3. Push the two retention latches on the riser-card assembly toward the second
microprocessor socket; then, grasp the assembly at the rear and side edges
and lift it to remove it from the server. Place the riser-card assembly on a flat,
static-protective surface.
Chapter 2. Installing optional devices
27