IBM x 340 Series, Руководство по техническому обслуживанию аппаратной части

Страница: 93 / 188

Netfinity Manager
85
where databasename is the name of the database and d is the drive where the
database will be located.
Note:
If any part of the database already exists, the utility program will create
only the portions of the database that are missing.
5. Press Enter.
Activating the database
The following information describes how to connect, bind, and grant privileges to the
database.
1. Connecting to the Database
a. Start a DB2 command window.
b. Type the following command:
DB2 CONNECT TO databasename
where databasename is the name of the database as specified in the database
installation step.
c. Press Enter.
2. Bind the package and the database
To prepare SQL statements stored in the bind file and store the package in the
database, perform the following steps from a system on which Netfinity Manager
for OS/2, Netfinity Manager for Windows 95, or Netfinity Manager for Windows
NT has been installed:
a. Open a DB2 command window.
b. In the DB2 command window, type the following command:
DB2 BIND x:\directory\DB2SQLC0.bnd
where x:\directory is the name of the drive and directory where Netfinity
Manager is installed.
c. Press Enter.
Granting and revoking database privileges
The following information describes how to grant and revoke database privileges.
Note: If your primary system is OS/2, refer to “Database privileges on OS/2
systems” on page 86.
1. Start a DB2 command window.
Notes:
a. If it is not already running, start the DB2 database manager.
b. If you are not connected to the DB2 Netfinity database, connect to the
database now.
2. Type the following command:
DB2 GRANT privilegecode ON TABLE tablename TO userid
where
• privilegecode is one of the following privilege codes: