IBM WebSphere DataPower XI50B, Инструкция по установке и эксплуатации

Страница: 36 / 62

5. Review the admin password information; then, enter a new password at the
prompt.
admin
is the name of a local user account. The owner of this account
can perform all tasks on the appliance.
6.
Enter the new password again at the confirmation prompt.
7. When prompted, start the installation wizard.
8. Follow the prompts to complete the base configuration.
After defining the base firmware configuration, the screen displays information
specific to your blade appliance, similar to the following:
Welcome to DataPower XI50 console configuration.
Copyright IBM Corporation 1999-2010
Version: XI50.3.8.1.0 build 123456 on 2010/07/01 12:00:00
Serial number: 06D0875
The previous sample shows the following information:
v
The appliance is a DataPower XI50B appliance
v
The firmware version running on the appliance is 3.8.1.0 at the 123456 build
level, built at 12:00 PM on July 1, 2010
v
The serial number for the appliance is 06D0875
If you were not able to complete the firmware installation, you can use the
startup
command to invoke the installation wizard. See “Defining the base configuration
manually” on page 25 for details.
Verifying the configuration with the WebGUI
To access the WebGUI from any browser, use the following procedure.
This procedure makes the following assumptions:
v
The IP address for the Ethernet interface is 10.10.13.35
v
The specialized HTTP server to support WebGUI access listens on port 9090
1. Open a Web browser.
2. Type the following value in the Address field:
https://10.10.13.35:9090
If the
Web page displays successfully, the base firmware configuration is successful.
3.
Log in to the blade appliance with the local admin account and password. If
the DataPower Control Panel displays, authentication of the local admin
account is successful.
24
IBM WebSphere DataPower Integration Blade XI50B Type 4195: Installation and User's Guide