IBM VXA-2 - Tape Drive - VXAtape, Руководство пользователя

Страница: 19 / 56

Table 3-1. Definition of status light combinations
Operation LED #1 Ready
(green)
LED #2
Activity
(green)
LED #3
Cleaning
(amber)
LED #4 Fault
(amber)
Power-on self-test Flashing Off Off Off
Power On LED Test On for 2.0
seconds
On for 2.0
seconds
On for 2.0
seconds
On for 2.0
seconds
No tape loaded Off Off On
1
/Off Off
Tape loaded, no
activity On Off On
1
/Off Off
Data or Cleaning
Cartridge loaded,
activity On Flashing On
1
/Off Off
Cleaning Cartridge
loaded, cleaning
failed
1
Off Off On
1
Off
Tape loading or
unloading
1
Off Flashing On
1
/Off Off
Unrecoverable drive
failure
2
On/Off Off On
1
/Off Flashing
2
Firmware Download Flashing Off On
1
/Off Off
Firmware Update Flashing Flashing On
1
/Off Off
Microcode Download
failure
3
Off Off On
1
/Off Flashing
2
Over Temperature
4
Off Off On
1
/Off On
Notes:
1. A solid amber LED indicates the drive needs cleaning. The drive will continue to
function, but, needs cleaning as soon as possible. A power cycle must not turn off this
indicator.
2. The Fault LED will flash to indicate an unrecoverable error. An unrecoverable error is
an error condition that results in the drive not being able to function unless initiator,
operator, or service intervention is applied. An unrecoverable drive failure is usually
the result of a hardware error condition. One of the following actions will be needed to
clear the flashing Fault LED:
v
Hard SCSI Reset
v
Cartridge Eject
v
Power Cycle
v
Retry Microcode Download
An unrecoverable cartridge (media) failure is usually the result of a defective cartridge,
media, or cartridge state and will require the drive to eject the cartridge (if possible) to
clear the flashing LED.
3.
The firmware download failed and the drive is not functional. The drive boot code is in
control and the microcode download should be retried.
4. The Fault LED will be on solid to indicate an over temperature condition.
Chapter 3. Using the tape drive
3-3