IBM VIAVOICE 10-ADVANCED EDITION, Руководство пользователя

Страница: 39 / 126

To create a document with your voice, select a dictation
application from the
Dictate To menu.
Say
"Dictate to SpeakPad"
or
"Dictate to Word"
(if Word is
on your computer and Microsoft Office support has been
installed).
For more information, see:
v
Chapter 4, “Dictating into SpeakPad” on page 31
v
Chapter 5, “Dictating into Microsoft Word” on page 43
v
Chapter 6, “Correcting your dictation” on page 57
To correct your dictated text with your voice, say "Show
Correction window" , or select Show Correction Window
from the ViaVoice menu. See Chapter 6, “Correcting your
dictation” on page 57.
To proofread your text when correcting errors, say "Begin
Reading"
, or select
Begin Reading
from the ViaVoice menu.
Woodrow reads aloud your document.
You can have Woodrow read only a selection of text by
highlighting that selection. Woodrow can also read aloud
text, like e-mail, that you did not create through dictation.
You cannot use voice commands when Woodrow is reading.
To start, stop or pause reading, use the buttons on the
toolbar.
To set up your microphone or audio input device to work
with ViaVoice, or to adjust settings, select
Audio Setup from
the ViaVoice menu. Run Audio Setup whenever:
v
The acoustics of your work area have changed.
v
You have changed your microphone.
v
You have installed a new sound card or changed your
computer.
Chapter 3. Introducing VoiceCenter
29